Create a Website Account - Manage notification subscriptions, save form progress and more.
Show All Answers
Yes, a permit is required to install a wood or pellet burning stove. If it is to be installed in a manufactured home it shall be approved for such installation. If it is going to be installed in a garage it must meet clearance to combustibles requirements and the door shall be at least 18" above the floor.
Yes, since the replacement of a furnace is not one of the items exempted under the Uniform Mechanical Code from the permit process. A permit would be required prior to the replacement of the existing unit. Visit our Permits page or contact the Building Department for more information.
No. Once a gas service has been disconnected we are required to witness a gas test prior to authorizing reconnection. It is unlawful for anyone (including the utility) to reconnect the gas service without first receiving authorization from the Humboldt County Building and Safety Department.
For a "site built" home, the code requires a gauge which measures in "Pounds per Square Inch" (PSI). The test consists of the gas line pressurized to a minimum of 20 PSI for 20 minutes. The test will then be conducted in the presence of a Building Inspector, and upon successful completion of the test, the Building Inspector will authorize service with your local natural gas or propane utility. (
Rules regulating manufactured housing are specified by the Manufactured Housing Division. Under Nevada law manufactured homes shall have their gas systems tested with a manometer gauge. (This is an instrument capable of measuring in water column (WC)"). The test shall be conducted with the entire system pressurized between 10 inches of water column (10 inches WC) and 14 inches of water column (14 inches WC) for a minimum time period of 10 minutes. When this test is successfully completed, the Building Inspector will authorize utility connection. (See Nevada Administrative Code 489.440.)